Omega OM-80/100/130 Specifications

Model

OM-80 OM-100 OM-130
CPU 32bit
Drive Digital Servo
Maximum cutting area

3m*760mm guaranteed 32m*760mm parameters

3m*1000mm guaranteed 32m*1000mm parameters

3m*1220mm guaranteed 32m*1220mm parameters

Loadable film width 930mm(37") to 100mm 1170mm(46") to 106mm 1390mm(55") to 106mm
Maximum cutting speed 1,131mm/s (diagonal), 800mm/s(axis)
Cutting force 30-­500gf
Minimum character size 5mm±(0.2in2), alphanumerics, but depends on the material and font selected

Mechanial resolution

0.005mm(0.0002")
Programmable resolution SP-GL:0.25­0.0125mm/20steps(menu-selectable):HP-GLTM:0.025mm
Repeatability Plotter mode:within 0.1mm, Cutter mode:within 0.2mm
Perpendicularity Within 0.5mm/760mm Within 1.5mm/1000mm Within 1.5mm/1220mm
Number of cutters/pens 1piece / 1piece
Cutter blade/pen types Cutter blade:Supersteel/pen:Ball type
Interfaces RS-232C serial and Centronics parallel
Buffer Capacity 4MB
Command sets SP-GL and HP-GLTM emulation
LCD display size 20 characters * 2lines
Power requirements 90-250V AC, 50-60Hz 90-260V AC, 50-60Hz
Power consumption Within 120VA Within 160VA
Operating environment +10°C  to  +35°C:  75% RH(Non-condensing), Recommended environment :
+16°C to +32°C: 35% to 70% RH(Non-condensing)
External dimensions With stand :
1091(W)*286(D)
*1096(H)mm
Without stand :
1091(W)*286(D)
*253(H)mm

With stand :
1363(W)*618(D)
*1096(H)mm
Without stand :
1363(W)*286(D)
*253(H)mm

With stand :
1583(W)*618(D)
*1096(H)mm

 
Without stand :
1583(W)*286(D)
*253(H)mm

Weight

Plotter : 20kg¸(44lbs) Stand : 13kg¸(29lbs)

Plotter : 26kg¸(57lbs) Stand : 15kg¸(33lbs)

Plotter : 29kg¸(64lbs) Stand : 16kg¸(35lbs)

The design and specification of the products can be changed without prior notice for some improvements.

HPGL is a registered trademark of the Hewlett-Packard Company

[Home]